News

Novice drivers guide teach you how to quickly master the shift technique

Now more and more owners have opted for an automatic car, cars with automatic transmission eliminates the clutch pedal makes control easier and relaxed. Although automatic transmission car effort, simple operation, automatic transmission and manual transmission system are two completely different designs, in addition to the two ultimate objectives outside the same, its principles and methods are not the same.
manual shift techniques for hand car,
, to drive freely, the importance can be said to bear the brunt of the clutch. Cars start at the wheel, shift and low-speed brake needs the clutch pedal, other times not nothing to step on the clutch, or put your foot on the clutch pedal.
at the start of proper operation. When stepping on the operation of the clutch is "a slow, second, three linkages." Pedal lift quickly picked up at the start; half occurred when the clutch linkage (engine sound change), lift the pedal slowly; by linkage to a fully integrated process, will pedal slowly picked up on the clutch pedal to lift at the same time, according to the engine resistance gradually stepping on the accelerator pedal, making the car a smooth start.
correct operation when shifting. In the lane when shifting, manipulation of the clutch pedal should be quickly pressed and lifted, half do not appear linked, otherwise, may accelerate the wear of the clutch. In addition, operation should pay attention to in conjunction with gas.
in order to shift smoothly, reducing transmission shift mechanism and clutch wear, promoting the use of "two-clutch shift." Although this method is complicated, but good way to save money is driving the car.
brake when used correctly. Car traffic, except for low-speed brake parking needs the clutch pedal, otherwise braking try not to step on the clutch pedal. Automatic gear shift
skills
selection of automatic transmission selector lever is equivalent to manual transmission shift lever, generally have the following gear: p (parking), r (reverse gear), n (neutral), d (forward), s (or2, the 2-speed gear), l (OR1, speed is 1 block). The correct use of these gears are especially important for people who drive automatic transmission cars.
after driving an automatic transmission vehicle, if you want to keep a good acceleration performance, you can always keep the throttle, automatic transmission at high speeds and rises into higher gear; if you want a smooth driving, can light up the accelerator pedal in due course, the transmission will automatically rise block. When the engine in the same speed low speed can achieve better efficiency and quiet drive. Then rides the accelerator pedal continues to accelerate, the transmission will not return to the original shift soon, this is the designer designed to prevent the frequent shift of early liter block, delayed downshift feature. Understand this truth will be free to enjoy the driving pleasure of automatic transmission.
in addition to these major differences, there are differences in the skill. When turning in cars, for example, especially in front-wheel-drive car, come on turn in the corners than reducing oil or glide more secure and easy to control. Automatic transmission car due to refuel after the braking speed there is a short lag, so driving an automatic car when cornering brake early, and reduce speed to low, then refuel vehicle traction drive turn. If the turn too abruptly, and then slam on the brakes, the vehicle will spin or roll phenomenon, was not safe. Automatic car overtaking skills are also very important, and when overtaking urgently accelerate the transmission computer power alone is difficult to complete in a short time, so at this point it should be stepping foot loose, then slammed down speed of the engine rapidly, reach a car lift speed results.
more and more owners have opted for an automatic car, cars with automatic transmission eliminates the clutch pedal makes control easier and relaxed. Although automatic transmission car effort, simple operation, automatic transmission and manual transmission system are two completely different designs, in addition to the two ultimate objectives outside the same, its principles and methods are not the same.
selection of automatic transmission selector lever is equivalent to manual transmission shift lever, generally have the following gear: p (parking), r (reverse gear), n (neutral), d (forward), s (or2, the 2-speed gear), l (OR1, speed is 1 block). The correct use of these gears are especially important for people who drive automatic transmission cars.
after driving an automatic transmission vehicle, if you want to keep a good acceleration performance, you can always keep the throttle, automatic transmission at high speeds and rises into higher gear; if you want a smooth driving, can light up the accelerator pedal in due course, the transmission will automatically rise block. When the engine in the same speed low speed can achieve better efficiency and quiet drive. Then rides the accelerator pedal continues to accelerate, the transmission will not return to the original shift soon, this is the designer designed to prevent the frequent shift of early liter block, delayed downshift feature. Understand this truth will be free to enjoy the driving pleasure of automatic transmission.
in addition to these major differences, there are differences in the skill. When turning in cars, for example, especially in front-wheel-drive car, come on turn in the corners than reducing oil or glide more secure and easy to control. Automatic transmission car due to refuel after the braking speed there is a short lag, so driving an automatic car when cornering brake early, and reduce speed to low, then refuel vehicle traction drive turn. If the turn too abruptly, and then slam on the brakes, the vehicle will spin or roll phenomenon, was not safe. Automatic car overtaking skills are also very important, and when overtaking urgently accelerate the transmission computer power alone is difficult to complete in a short time, so at this point it should be stepping foot loose, then slammed down speed of the engine rapidly, reach a car lift speed results.
BACK